Bar Coater or K Coater
The UEC “Bar Coater” is especially designed for the “Traditional Coating Method” whereby the coating is applied on the substrate by a “Wire Wound” or “Mayer’ Bar, under accurately controlled conditions with variable coating speed between 2 and 15 mm/min, which provides uniform coating.
The UEC “Bar Coater” is especially designed for the “Traditional Coating Method” whereby the coating is applied on the substrate by a “Wire Wound” or “Mayer’ Bar, under accurately controlled conditions with variable coating speed between 2 and 15 mm/min, which provides uniform coating.
The “Wire Wound Bar” consists of a steel bar with a wire around it, whereas the diameter of the wire determines the thickness of the coating layer. The choice of wire diameter depends on the “Viscosity of the Coating Material”, the “Desired Coat Weight or Thickness” and the “Coating Speed”. The applicable surface coating materials are the Paints, Varnishes, Adhesives, Liquid Printing Inks, Starch etc.
The motorized unit, mounted with an Offset Blanket of Standard Coating Area (27 cm x 15 cm ), is provided along with “Seven Nos. of Coating Rods”, which provide different coating thickness.
- Writing Printing/Copier Paper (Grammage)
- Writing Printing/Copier Paper (Thickness)
- Duplex And Art Paper (Grammage)
